Laboratory Spray Booth

Ideal Application :

• 0-10 Ltrs. Paint Consumption.

• For Laboratory Samples.

• For Light Weight Components

Low Production  - Dry Back Spray Painting Booth

The DRY BACK SPRAY PAINTING BOOTH is also called as Low Cost Spray Booth, i.e., if the components or the products to be painted is very small or less in numbers or the production is too low then DRY BACK BOOTH is the ideal equipment.

These kind of booths are more popular in laboratory and research and development divisions. As mentioned above “AutoCoat” designed DRY BACK SPRAY BOOTHS are categorised into Metal Baffled DRY BACK BOOTH and Coarse Filter DRY BACK BOOTH. Metal Baffled DRY BACK BOOTH consists of specially designed and air calculated metallic baffles or paint eliminators. 80 to 90 percent of the dry over spray dust is been trapped into these baffles, thus leaving behind clear and less smoky air towards the exhauster.

The main advantage in the metallic baffled DRY BACK BOOTH is that it can be cleaned by usual cleaning methods and reused as before and also reduce the maintenance cost. Coarse Filter DRY BACK BOOTH consists of specially designed and air calculated paint filters or air filters. 80 to 90 percent of the dry over spray dust is been trapped into these filters, thus leaving behind clear and less smoky air towards the exhauster.

The main disadvantage in the coarse filter DRY BACK BOOTH is that it cannot be cleaned by usual cleaning methods and reused as before since the filters are to replaced as per the paint accumulation frequency by new filters, thus increasing maintenance cost.

Both the above DRY BACK BOOTHS are available in sizes from 1500mm w (5 feet) and multiples of 750mm above. Also these DRY BACK BOOTHS are a good substitute for places where production is low and there is a difficulty in disposal of wet paint sludge.

Standard (Pumpless)

Down Draft Spray Painting  Booth

M/S AutoCoat Engineering (I) Pvt. Ltd., designed DOWNDRAFT SPRAY PAINTING BOOTHS are specially used for painting of heavy parts and components which have large size, load and weight and those which are difficult to handle namely, wagons, earth moving machineries, chassis of vehicles, trailers, etc. In a DOWNDRAFT SPRAY PAINTING BOOTH the fresh air flows from top to bottom. The water tank is placed underground in the DOWNDRAFT SPRAY PAINTING BOOTH. The DOWNDRAFT SPRAY PAINTING BOOTH can be single sided or double sided depending on the size of the component. Painter goes around the component to paint all sides of componence. The over spray paint particles in a DOWNDRAFT SPRAY PAINTING BOOTH are removed through a metallic grill by blowing the extra paint particles off by the fresh air which passes from top to bottom.

DOWNDRAFT SPRAY PAINTING BOOTHS are available in many models.
(A) Downdraft Dry Back Type
(B) Downdraft Wet type.
(C) Downdraft Pit type i.e. collection tank is situated under the finished floor level
(D) Downdraft specialized Uplifted Tank model allows most shop the opportunity to
utilize the benefits of a DOWNDRAFT SPRAY PAINTING BOOTH.
(E) Downdraft Booths are also available in conveyorised schemes for continuous
painting of huge mass products such as chassis, car body, large engines, transformers,
export containers, truck body cabins etc.
(F) Downdraft Central suction type down draft booth.
(G) Downdraft Single Sided.

Pit style DOWNDRAFT SPRAY PAINTING BOOTHS require excavation and additional concrete work. The side walls of this kind of booth can be added up with water curtains or water screen. DOWN DRAFT BOOTH can be connected in line with air supply units or air replacement units for better performance.
Along with this for the removal of the sludge formed by the paint waste AutoCoat has developed Paint Sludge Removers.
 

Water Wash Spray Painting Booth

The WATER WASH SPRAY PAINTING BOOTH provides an extremely efficient means of removing paint particles from the exhausted air by using water as a filtration media, have designed the WATER WASH SPRAY PAINTING BOOTHS for many finishing applications.

We also offer both pump as well as no-pump versions in open type model, enclosed type model and conveyorised models. Standard WATER WASH SPRAY PAINTING BOOTHS are utilized for high volume paint usage, medium or large sized components and batch processes.

WATER WASH SPRAY PAINTING BOOTH contains special features like water tank or over spray paint collection disposal tank, specially designed eliminators (baffles), saw tooth plates, washing chamber and high pressure exhaust blower. This type of painting booth is more popular where the paint consumption is 10-100 liters/shift , heavy paint consumption, high production and / for any component.

Working of WATER WASH SPRAY PAINTING BOOTH is very simple. When the paint is sprayed on the component the over spray is sucked rapidly by the high pressure centrifugal blower through the saw tooth plate and the eliminator. During the above process the paint waste particles get cut at the saw tooth plate thereby separating the thinner to the exhaust blower and paint waste into the tank. More finer spray dust is eliminated in the washing chamber. Paint is actually washed in this chamber.

The best advantage of WATER WASH SPRAY PAINTING BOOTH is that lumps of waste paint is collected in the collection tank thereby helping the user to dispose it easily.

Maintenance in this kind of booth is very low as compared to the Dry Back versions. The WATER WASH SPRAY BOOTHS designed and engineered by AutoCoat, is available in three kinds of schemes, namely



AEIPL ( Autocoat Engineering (I) Pvt. Ltd.)

1 Standard WATER WASH SPRAY PAINTING BOOTH (available in the selection
chart) also known as No-Pump Booth or Pumpless Booth

2 WATER WASH SPRAY PAINTING BOOTH with water curtain or water screen
(available in mild steel or stainless steel versions),

3. Civil Escavated WATER WASH SPRAY PAINTING BOOTH

4. Conveyorised WATER WASH SPRAY PAINTING BOOTH etc. WATER WASH
SPRAY BOOTH can be connected in line with air supply units or air replacement
units for better performance.

Along with this for the removal of the sludge formed by the paint waste AutoCoat has developed Paint Sludge Removers, specially recommended for paint consumption over 100 liters/day.
 

WE ALSO PROVIDE

• Filter Doors

• Energy Saver
• Exhaust Chambers
• Exhaust
• Bench (Andrew Filters)
• Bench Type Booth (Andrew Filters)
• Bench Type Booth (Paint Arestor)
• Floor Type Spray Booth