STANDARD SPRAY PAINTING BOOTH
This  is also called as Low Cost Spray Booth, i.e., if the components or the products to be painted is very small or less in numbers or the production is too low then this is the ideal equipment.  These kind of booths are more popular in laboratory and research and development divisions. As mentioned above booths  designed  two categorized into Metal Baffled  and Coarse Filter booth Metal Baffled BOOTH consists of specially designed and air calculated metallic baffles or paint eliminators. 80 to 90 percent of the dry over spray dust is been trapped into these baffles, thus leaving behind clear and less smoky air towards the exhauster.

Metal baffled DRY BACK BOOTH  : The main advantage in the metallic baffled booths is that it can be cleaned by usual cleaning methods and reused as before and also reduce the maintenance cost. Coarse Filter booths consists of specially designed and air calculated paint filters or air filters. 80 to 90 percent of the dry over spray dust is been trapped into these filters, thus leaving behind clear and less smoky air towards the exhauster. 

coarse filter DRY BACK BOOTH  : The main disadvantage in the coarse filter dry back booths is that it cannot be cleaned by usual cleaning methods and reused as before since the filters are to replaced as per the paint accumulation frequency by new filters, thus increasing maintenance cost.  Both the above BOOTHS are available in sizes from 1500mm w (5 feet) and multiples of 750mm above. Also these booths are a good substitute for places where production is low and there is a difficulty in disposal of wet paint sludge.

   Down Draft Spray Booth for Spray Painting plants