Home Page | Standard Product  | Powder Coating & Recovery Booth | Industrial Oven | Pre-Treatment | Turn-key Project | Upgradation | Product Package | Contact Us

 
 

 








 

 

 

 

 
 
 
 


 


 


 

INDUSTRIAL  OVEN

CURING OVENS  :

Auto-Coat Engineering (I) Pvt Ltd., offers a wide range of CURING OVENS namely Paint Baking Ovens, Industrial Oven, Infrared Ovens, Gas Fired Ovens, Diesel Fired Ovens, Camel Back Ovens and Electrical Ovens.

Our CURING OVENS are designed in such a way so as to consume low power with a uniform temperature in the working space provided in the CURING OVENS. Our CURING OVENS are specially built and designed for Powder Curing and Liquid Curing purposes. The powder is firstly melted at a required degree of temperature for a certain time. The product is then flown out, chemically reacting so that it is completely cured and ready to use for which it is designed.

A gas burner and a fan is required for heating the inside of the CURING OVENS. The curing temperature depends on the requirement of powder materials. The material is heated by the hot air in the curing oven which helps in heating the coating. The curing time may be short or long depending upon the load of the product. Curing Oven is dependable and flexible.

Infrared radiations are used in the infrared ovens to increase the heat. The heating means in an infrared oven comprise a plurality of centrally directed infrared lamps extending from a frame member which selectively projects radiation onto the component as it passes through the leading end of the first zone. One of the key features associated with using infrared lamps in infrared ovens is that each lamp can be controlled to emit radiation at a selected efficiency between 0-100%. By controlling the efficiency of each infrared lamp, compensation for differences such as size, shape and the amounts and types of coatings used on the component.

A gas Fired Oven is generally cost benefit and efficient. Excessive air in the CURING OVEN can cause the powder to be blown off of the parts. It can also lead to damage of other parts or the walls of the CURING OVEN. In order to avoid such a turbulence the duct of the CURING OVEN is built in such a way so as to enable even distribution of heat in the CURING OVEN.

The CURING OVEN must be sized according to the mass of the product, the capacity of the burner and also be able to handle the production volume. Any unevenness in temperature may lead to uneven coloring of the product. Therefore balancing the airflow and temperature in the CURING OVEN is very essential.

Along with this for the removal of the sludge formed by the paint waste Autocoat has developed Paint Sludge Removers.

 

 

 

CONVECTION TYPE OVEN
 
click here to view photo

 

Model

Compartment

Temp

Power

 

Size (mm)

Deg. C

(KW)

 

(H)

(D)

(W)

 

 

 AEBO-SS

1200 

900 

900 

 200

 9

 AEBO-S

 1200

 1200

 1200

 200

 12

 AEBO-M

 1500

 1200

 1200

 200

 15

 AEBO-L

 1800

 1200

 1200

 200

 18

   
 

Standard Paint Baking Oven

Model

Working size Recommended trolley size

Heating  Capacity

Permissible
load kgs.   

SS

1200x1200x1200

12 kw

100
S

1200x1200x1800

 1000x900x1500

18 kw 150
M

1400x1800x1800

 1200x1500x1500

24 kw 200
L

1500x2100x1800

 1300x1800x1500

36 kw 250

click here to view photo



    Convection Direct or Indirect OR IR Types.
•    Electrical or Thermic or LDO or LPG fired.
•    Batch or Conveyorised.
•    Liquid Paint Baking or Powder Curing Ovens.
•    Autocoat Ovens utilize, recirculated hot air for heat transfer and any selection of fuel for heating.
     Regardless of the shape of components, complete baking or curing is achieved and can be certified with TTR graphs.
•    Our speciality Boosting Ovens in “Existing Paint Shop” to increase productivity.


 



 

Home  |  Feedback | Contact Us | Site map |

Copyright 2012  Autocoat  (India) Pvt. Ltd.   All Rights Reserved

Standard Paint Booth |Standard Painting Booth|Spray Booth |Spray Painting Booth |Standard Dry Back Booth|Water Wash Spray Booth  |Down Draft Booth |Powder Booths  |Pre-Treatments |Infrared Ovens  | Automatic Painting System Powder Coating  Plants |Powder Coating & Recovery Booth |Industrial Oven |Conveyorized Powder Coating Plants|Infrared ovens|Spray Painting Equipment | Turn Key Paint Shops |Spray booth cum Oven | Site map | XML Sitemap

Autocoatindia provides the highest quality standard painting booths, spray painting plants, Powder Coating Booths for your application.

India Leading Manufacture of standard painting booths, spray painting plants, Powder Coating Booths